Konnect Kables Cummins 2350 Adaptor

Description

Cummins 2350 Adaptor

Pinned out for the CM2350 or CM2350A ECM, do not the be confused with CM2350B, check the ECM label carefully to confirm.  We are happy to exchange if you purchase the wrong one but we will charge for the additional freight costs.  The adaptor does accommodate boot mode. The adaptor needs to be used in conjunction with a Base Cable to produce a complete and functioning bench harness  for the  CM2350 ECM.   The completed harness allows for the standard diagnostic and programming software to be used while on the bench or still in situ.

If keeping the ECM in place disconnect the engines battery ( not just isolation switch ) and disconnect all other plugs to the ECM.

To be used on CM2350 ECM’s which are common on ISX, ISB engines

The cable requires a base cable either KKCMBASESH01 or KKCMBASELG01

Cummins cables can be used for a variety of purposes, including:

• Flashing Standard Calibrations
• Flashing Customized ECM Programs
• Diagnostics when OBD plug is faulty
• Programming the ECM when not on the truck

With CANBUS communication becoming more complex, even with simply flashing standard files, manufacturers are now recommending the use of bench harness’s rather than flashing via the OBD port to prevent potential file corruption.   By extension if flashing customized files the risks are even greater.   So if your focus is on providing the very best programming you need to be flashing via a ECM bench tuning harness.