Konnect Kables Cummins CM500 Adaptor

Description

Cummins 500 Adaptor

Pinned out for CM500.  The adaptor does accommodate boot mode. The adaptor needs to be used in conjunction with a Base Cable to produce a complete and functioning bench harness for the  CM500 ECM.   The completed harness allows for the standard diagnostic and programming software to be used while on the bench or still in situ.

If keeping the ECM in place disconnect the engines battery ( not just isolation switch ) and disconnect all other plugs to the ECM.

This Cummins programming harness is to be used on CM500 ECM’s which are common on QSK19, QSK23, QSK45, QSK60 AND QSK78 engines

This ECM tuning harness requires a base cable either KKCMBASESH01 or KKCMBASELG01. If you have a Cummins base harness or one from another independent suppler, This ECM tuning harness will be compatible.

Cummins cables can be used for a variety of purposes, including:

• Flashing Standard Calibrations
• Flashing Customized Programs
• Diagnostics when OBD plug faulty
• Programming the ECM when not on the truck

With CANBUS communication becoming more complex, even with simply flashing standard files, manufacturers are now recommending the use of bench harness’s rather than flashing via the OBD port to prevent potential file corruption. By extension if flashing customized files the risks are even greater. So if your focus is on providing the very best programming you need to be flashing via a ECM bench tuning harness.